Energy industry

  • TK series turbine generators, 1.5-6 MW

    TK series turbine generators with an opened-circuit ventilation are designed to generate electrical energy as a part of gas turbine power plants when paired with a gas (Г) turbine.

    TK series turbine generators with a closed-circuit ventilation are designed to generate electrical energy as a part of steam turbine power plants when paired with a steam (П) turbine.

  • ГТГ series turbine generators, 2.5-8 MW

    ГТГ series turbine generators with an opened-circuit ventilation are designed to generate electrical energy as a part of gas turbine power plants when paired with a gas (Г) turbine.

    ГТГ series turbine generators with an closed-circuit ventilation are designed to generate electrical energy as a part of steam turbine power plants when paired with a steam turbine. Turbine generators with a letter (П) have one support bearing, with a letter «М» - two support bearings.

  • Т (TC) series turbine generators, 2.5...63 MW

    Т(ТС) series turbine generators are designed to generate electrical energy when paired with a steam (П) or gas (Г) turbine.

  • TTK series turbine generators, 8-160 MW

    ТТК series turbine generators in a tubular housing are designed to generate electrical energy when paired with a steam (П) or gas (Г) turbine.

  • Hydrogenerators

    Применяются для выработки электроэнергии на гидроэлектростанциях (ГЭС) и работы в режимах двигатель/генератор на гидроаккумулирующих электростанциях (ГАЭС).

    Изготавливаются в вертикальном или горизонтальном исполнении в соответствии с современными отраслевыми стандартами и индивидуальными техническими требованиями Заказчика. Конструкция обеспечивает надежность, эргономичность и высокие технико-экономические показатели в течение всего срока службы.

    Used to produce electric energy at hydroelectric power plants (HPPs) and to operate in engine/generator modes at hydroelectric pumped storage power plant (HPSPP).

    Manufactured in vertical or horizontal versions according to the up-to-date industry standards and individual Customer requirements. The design ensures reliability, ergonomics and high engineering and economical performance over the entire service life.

    Hydraulic generators and engine generators are supplied in set with brushless or static thyristor excitation systems, cooling, braking, fire-fighting, monitoring and troubleshooting systems.

    The scope of supply includes the tools and appliances necessary for installation and operation.

  • Motors for main circulation pumping modules used at nuclear power plants

    ДАВЗ-8000-6 АМ 05 asynchronous vertical enclosed squirrel-cage motor powered by three-phase 50 Hz AC mains is designed to drive the main circulation pumping modules ГЦНА 1713 of WWER power stations at nuclear power plants. Manufactured according to the requirements of ТУ3381-025-59162910-2009

    ДАВДЗ-7100/2800-10000-6/8 АМ 05 asynchronous vertical two-speed enclosed squirrel-cage motor powered by three-phase 50 Hz AC mains is designed to drive the main circulation pumping module ГЦНА-1391 of WWER power stations at nuclear power plants. Manufactured according to the requirements of ТУ3381-026-59162910-2009

  • Motors pumping modules used at nuclear power plants apart from ГЦНА

    Asynchronous three-phase motors with a short-circuited rotor, two-pole, powered by AC three-phase current with a frequency of 50 Hz, are designed to drive pumps and other high-speed mechanisms, can also be used in nuclear power plants.

  • ВАСО series vertical explosion-proof motors

    The ВАСО asynchronous vertical explosion-proof motors powered by 380 V, 50 Hz AC mains are designed for direct drive of the air cooling devices, cooling tower fans. These motors can be used as part of a variable frequency drives with rotation speed adjustment using frequency inverters (on request).

    ВАСО series motors can be fitted with magnetic fluid seal.

  • АОД series asynchronous motors

    Asynchronous blown two-speed motors of the AOD type with power supply from the AC three-phase current with a frequency of 50 Hz are designed to drive the traction mechanisms of thermal power plants.

  • ВАСВ special vertical water-cooled motors

    ВАСВ asynchronous vertical motors are designed to directly drive the cooling tower fans from 6,000 V AC mains.

  • ДАСО vertical motors

    The ДАСО asynchronous vertical motors powered by three-phase 380 V, 50 Hz AC mains are designed for direct drive of the air cooling devices, cooling tower fans.

Product catalogs

Generators (pdf, 4.29 Mb)